The reader “Behind the wheel” offered an interesting way to prevent a vehicle fire, with ordinary pliers.“Behind the wheel”
Many have seen already extinguished the car again begins to burn. This is because the high temperature melts the insulation plus wiring battery, bare wires touching the body, which comes to “minus” from the battery, and short circuit causes the fire insulation. So before fighting, you must first reset the negative terminal on the battery. But what if the machine is off? An easy way to disconnect it is to eat a “mass” wire cutters. Keep them next to the fire extinguisher or pin under the hood so that it was easy to remove.
V. Dmitriev, Lipetsk
Prize to the author of the Council — the PowerBank battery 5400 mAh company Heyner.
Dear experts car! Sending tips, don’t forget to inform your postal address with six digit postal code, surname, name and patronymic (in full) and phone number for communication. This will significantly simplify and speed up the delivery of well-deserved prizes.
Their advice you can send an e-mail firstname.lastname@example.org. Possible illustrate their own know-how photographs and/or diagrams.
- How to make a handy device that allows you to Unscrew the bolt or nut, when the space for the head with the knob a little, read the link.
Photo: A. Hikmatullin
Photo: “Behind the wheel”