no image

Without the lift, but with the key: extra change the alternator belt

When you change the drive belt of the alternator without the lift and the pit, removing the wheel and pry off the fender liner, there is no strict adherence to the instructions. The reader “Behind the wheel”, in this situation, invented to replace the necessary for the operation of a special pin.Revin Alex “driving”the Expert

TO STRAP

A. Tovbin, Moscow

When you change the drive belt of the alternator without the lift and the pit, removing the wheel and pry off the fender liner, there is no strict adherence to the instructions. Crossover-Nissan X‑Тrail last generation with the 2.5 engine should be fixed spring tension roller with a special pin. Would be amiss and a nail, but to install and to remove it would have to close the space between the roller and the spar.

Easier key press the roller to reset the old belt, then snap the key with a wire to the front shock tower in position when the tensioner is fully compressed, and slowly to hold the new belt around all the pulleys. Weaken the wire, remove the key and check the correct position of the belt on the pulleys.

Prize to the author of the Council — external universal battery 12,000 mAh of the AirLine company.

Dear experts car! Sending tips, don’t forget to inform your postal address with six digit postal code, surname, name and patronymic (in full) and phone number for communication. This will significantly simplify and speed up the delivery of well-deserved prizes.

Their advice you can send an e-mail exp@zr.ru. Possible illustrate their own know-how photographs and/or diagrams.

Photo: A. Tovbin

Have you seen our most popular new videos? They — here. And here are our most popular image galleries.

Subscribe to motorsports on our channel in Yandex Zen

Залишити відповідь